SEARCH NOW FOR ALL YOUR ORIENTAL MOTOR SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
ORIENTAL MOTOR
PK513PA
5-PHASE STEP MOTOR, HIGH-TORQUE, 0.35A CURRENT, ROUND SHAFT, NO GEAR HEAD, 5 LEAD WIRES
✓ IN STOCK!
£101.50
Price with VAT:
£121.80
Repair Yours
Contact Us
ORIENTAL MOTOR
FBLD120SW
SPEED CONTROLLER, BRUSHLESS DC, 3 PHASE, 200-230VAC
✓ IN STOCK!
£109.62
Price with VAT:
£131.54
Repair Yours
Contact Us
ORIENTAL MOTOR
GFB5G20
GEARHEAD 20:1RATIO
✓ IN STOCK!
£57.87
Price with VAT:
£69.44
Repair Yours
Contact Us
ORIENTAL MOTOR
5GU9KA
PARALLEL SHAFT GEARHEAD, GU SERIES, 5/8 INCH SHAFT, 3.54 INCH FRAME SIZE, 9:1 GEAR RATIO
✓ IN STOCK!
£72.21
Price with VAT:
£86.65
ORIENTAL MOTOR
VEXTA
5GN5-KA
GEAR HEAD PARALLEL SHAFT 5:1 RATIO
✓ IN STOCK!
£64.87
Price with VAT:
£77.85
Repair Yours
Contact Us
ORIENTAL MOTOR
VEXTA
5GU5KB
GEAR HEAD, 5:1 RATIO, PARALLEL SHAFT, 90 MM FRAME SIZE, 15 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£81.65
Price with VAT:
£97.98
ORIENTAL MOTOR
5GN5SA
GN GEARHEAD, PARALLEL SHAFT, RATIO 5:1
✓ IN STOCK!
£50.75
Price with VAT:
£60.90
Repair Yours
Contact Us
ORIENTAL MOTOR
CC010VZRA
MOTOR CONNECTION CABLE, AZ SERIES, MULT-AXIS CONTROLLER
✓ IN STOCK!
£101.60
Price with VAT:
£121.92
ORIENTAL MOTOR
SCM560GVH-EC
SPEED CONTROL MOTOR, 60 W, 220-230 VAC, 1250-1450 RPM
✓ IN STOCK!
£76.29
Price with VAT:
£91.55
Repair Yours
Contact Us
ORIENTAL MOTOR
5GU30K
MOTOR GEAR HEAD, GEAR RATIO 30:1, OUTPUT DIAMETER 15 MM, FRAME SIZE 3.54 IN
✓ IN STOCK!
£92.25
Price with VAT:
£110.70
ORIENTAL MOTOR
VEXTA
PK243-01AA
MOTOR, STEPPER, SINGLE SHAFT, 1.8DEGREE STEP,0.191OZ/IN
✓ IN STOCK!
£53.93
Price with VAT:
£64.71
ORIENTAL MOTOR
4IK25A-SW2
INDUCTION MOTOR, ROUND SHAFT, NO GEARHEAD, 25 W, 1/30 HP, 3 PHASE, 200 - 230 VAC, 50 / 60 HZ, 8 MM OUTPUT SHAFT DIAMETER, 1.38 LB-IN AT 60 HZ, 1.63 LB-IN AT 50 HZ.
✓ IN STOCK!
£84.54
Price with VAT:
£101.45
ORIENTAL MOTOR
ORIX
MRS16-DUL
FAN, 200/230VAC, 50/60HZ, 6.30IN, SINGLE PHASE, 0.25AMP, 51WATT INPUT, CONNECTION TYPE - TERMINAL BOX
✓ IN STOCK!
£82.32
Price with VAT:
£98.78
ORIENTAL MOTOR
5GE50S
GEARHEAD PARALLEL SHAFT, FOR INDUCTION MOTOR, STANDARD, GE PINION, (50:1)
✓ IN STOCK!
£114.00
Price with VAT:
£136.80
ORIENTAL MOTOR
PK264A2-SG10
STEPPER MOTOR, PK SERIES, 2 PHASE, 0.18 DEGREE STEP, 2 AMP, 1.4 OHM, OPEN LOOP
✓ IN STOCK!
£110.34
Price with VAT:
£132.41
ORIENTAL MOTOR
4GN36KA
GEARHEAD, PARALLEL SHAFT, 36:1 RATIO, 3.15 INCH FRAME SIZE, 3/8 INCH DIAMETER, ROHS COMPLIANT
✓ IN STOCK!
£46.89
Price with VAT:
£56.27
ORIENTAL MOTOR
5GE60SA
GEARHEAD, PARALLEL SHAFT, (60:1), 4 BOLT MOUNT
✓ IN STOCK!
£95.56
Price with VAT:
£114.67
Repair Yours
Contact Us
ORIENTAL MOTOR
MF915-BC
CROSS FLOW FAN, SINGLE PHASE, 100-115 VAC, 50/60 HZ, 0.35-0.45 AMPS
✓ IN STOCK!
£69.89
Price with VAT:
£83.86
ORIENTAL MOTOR
5GU15RA
GEARHEAD, RIGHT-ANGLE SOLID SHAFT, (15:1) RATIO, 3.54 INCH FRAME SIZE, 15 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£59.48
Price with VAT:
£71.38
ORIENTAL MOTOR
VEXTA
PK264A2-SG18
STEPPER MOTOR, PK SERIES, 2 PHASE, OPEN LOOP, 60 MM SQUARE FLANGE, 0.1 DEGREE STEP ANGLE
✓ IN STOCK!
£91.76
Price with VAT:
£110.11
Repair Yours
Contact Us
ORIENTAL MOTOR
PK243A1A-SG18
STEPPING MOTOR, 2-PHASE, SPUR GEAR, GEAR RATIO - 18:1, 112 OZ-IN, 6 LEAD WIRES, SINGLE SHAFT4-5.6 V DC, 2.5-10 MH/PHASE, 4.2-8.2 OHM
✓ IN STOCK!
£102.57
Price with VAT:
£123.08
ORIENTAL MOTOR
VEXTA
PK296-E4.5A
MOTOR, SINGLE SHAFT, 3.1NM 1.5MG/PHASE, 85MM FRAME
✓ IN STOCK!
£115.36
Price with VAT:
£138.43
ORIENTAL MOTOR
PK296-01AA
STEPPER MOTOR, ROUND SHAFT, 6 LEAD WIRES, 2 PHASE, 2 AMP, 1.8 DEGREE STEP ANGLE, 2.2 OHM, ROHS COMPLIANT
✓ IN STOCK!
£122.99
Price with VAT:
£147.59
ORIENTAL MOTOR
5GU120K
GEARHEAD, 120:1 RATIO, 90 MM FRAME, PARALLEL SHAFT,
✓ IN STOCK!
£129.84
Price with VAT:
£155.81
ORIENTAL MOTOR
CC100VAFT
EXTENSION MOTOR CABLE, 10 M, AC POWER INPUT, AR SERIES , 2 X 10 PIN CONNECTOR
✓ IN STOCK!
£112.45
Price with VAT:
£134.94
ORIENTAL MOTOR
5GU-120KB
GEARHEAD, 120:1RATIO, PARALLEL SHAFT, FRAME 3.54INCHES, 20NM, OUTPUT SHAFT 15MM
✓ IN STOCK!
£137.07
Price with VAT:
£164.48
ORIENTAL MOTOR
5IK90GU-SWT
INDUCTION MOTOR, 90W, 3PHASE, 1600R/MIN, 200-230VAC
✓ IN STOCK!
£119.08
Price with VAT:
£142.90
ORIENTAL MOTOR
VEXTA
5GU120KA
GEARHEAD, PARALLEL SHAFT, 120:1 RATIO, 5/8IN OUTPUT SHAFT
✓ IN STOCK!
£81.92
Price with VAT:
£98.31
ORIENTAL MOTOR
VEXTA
BLD224-5
BRUSHLESS DC MOTOR SPEED CONTROL DRIVER, 24VDC, 2A MAX
✓ IN STOCK!
£79.40
Price with VAT:
£95.28
ORIENTAL MOTOR
5GU7.5KB
GEARHEAD PARALLEL SHAFT, 75:1 RATIO, 3.54 IN FRAME SIZE, 15 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£57.67
Price with VAT:
£69.20
Repair Yours
Contact Us
ORIENTAL MOTOR
VEXTA
5GU30KB
PARALLEL SHAFT GEARHEAD, FRAME: 3.54", 30:1 RATIO, OUTPUT SHAFT DIAMETER 15MM
✓ IN STOCK!
£117.00
Price with VAT:
£140.40
ORIENTAL MOTOR
5GE18RA
GE GEARHEAD RIGHT-ANGLE SOLID SHAFT (18:1)
✓ IN STOCK!
£89.05
Price with VAT:
£106.86
ORIENTAL MOTOR
2IK6GN-SWM
BRAKE INDUCTION MOTOR, ELECTROMAGNETIC, 6 WATT OUTPUT, 3 PHASE, 200/220/230 VAC, 60/50 HZ, LEAD WIRE, 1200 RPM (200 VAC/50 HZ), IP20
✓ IN STOCK!
£86.41
Price with VAT:
£103.69
ORIENTAL MOTOR
BH6G2-3
GEARHEAD, PARALLEL SHAFT, GEAR RATIO 3 :1, FRAME SIZE 4.09 IN, FOR USE WITH BH SERIES MOTORS
✓ IN STOCK!
£124.42
Price with VAT:
£149.30
ORIENTAL MOTOR
VEXTA
GFS6G5FR
GEARHEAD, PARALLEL SHAFT, RATIO 50:1, 22MM SHAFT
✓ IN STOCK!
£126.17
Price with VAT:
£151.40
ORIENTAL MOTOR
5GCH30KB
GEAR HEAD, 90 MM FLANGE, 30 REDUCTION RATION, PARALLEL SHAFT, TOOTHED SHAFT, GCH GEARED SHAFT SHAPE, FOR USE WITH C/B MOTORS
✓ IN STOCK!
£90.07
Price with VAT:
£108.08
ORIENTAL MOTOR
4RK25GN-CM
DISCONTINUED BY MANUFACTURER, MOTOR, 0.4AMP, 200V, 25W, 50/60HZ, 1250/1500RPM
✓ IN STOCK!
£233.63
Price with VAT:
£280.36
ORIENTAL MOTOR
VEXTA
PK566-NA
5-PHASE STEPPING MOTOR, DC 1.4A, 0.72"/STEP, 1.1A
✓ IN STOCK!
£142.61
Price with VAT:
£171.13
ORIENTAL MOTOR
5GU120RH
GU GEARHEAD, RIGHT-ANGLE, HOLLOW SHAFT, 120:1 RATIO, 17 MM OUTPUT SHAFT DIAMETER
✓ IN STOCK!
£105.97
Price with VAT:
£127.17
ORIENTAL MOTOR
5IK60RGU-AFP
SPEED CONTROL MOTOR, INDUCTION TYPE, K-SERIES, THERMALLY PROTECTED, 1.8 AMP, 1/12 HP, 60 W
✓ IN STOCK!
£167.24
Price with VAT:
£200.69
ORIENTAL MOTOR
PK2913-F4.0B
STEPPER MOTOR, 2 PHASE, STEPPING PK SERIES, 1320 OZ-IN HOLDING TORQUE, ROUND SHAFT, 8 LEAD WIRE
✓ IN STOCK!
£212.57
Price with VAT:
£255.08
ORIENTAL MOTOR
5GU60-KB
GEARHEAD, 60:1, PARALLEL SHAFT, MOUNTING SCREWS, PARALLEL KEY, 90 MM FRAME SIZE
✓ IN STOCK!
£105.26
Price with VAT:
£126.31
ORIENTAL MOTOR
USM590-502W
AC SPEED CONTROL MOTOR, IP20, 90W, 200-230VAC, 50/60HZ, 0.80-0.93AMP, 1200-2450RPM
✓ IN STOCK!
£207.54
Price with VAT:
£249.05
ORIENTAL MOTOR
CC10SBFM
MOTOR EXTENSION CABLE, 10M CABLE LENGTH, FOR ENCODER
✓ IN STOCK!
£151.68
Price with VAT:
£182.01
